|
01-30-2012
|
#1 |
 
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,453
|
WTB: Fuel Injector Gaskets
I pulled my plenum yesterday and while carefully removing the connectors off of the fuel injectors, I noticed I am missing one of those square gaskets that fit up in the connector for the fuel injector. Can you still get those from GM?
Rich
__________________
1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member |
|
|
|
01-30-2012
|
#2 |
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,123
|
Re: WTB: Fuel Injector Gaskets
Not sure but if not Marc Haibeck might be able to hook you up
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
01-30-2012
|
#3 | |
|
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,453
|
Re: WTB: Fuel Injector Gaskets
Quote:
Rich
__________________
1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member |
|
|
|
|
|
01-30-2012
|
#4 |
 
Join Date: Jul 2005
Location: Mendota Heights, MN. 55120
Posts: 983
|
Re: WTB: Fuel Injector Gaskets
I lost 2 of them during my plenum pull. I made new ones with gasketing material of the same thickness. Been in there for a couple of years now and no problems. Total cost around $1........use an existing one for the pattern...............
|
|
|
|
|
01-30-2012
|
#5 |
 Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,786
|
Re: WTB: Fuel Injector Gaskets
You can just swing by the pull-it-yourself wrecking yard and get those same rubber seals out of any bosch style injector plug- just about most of the 90's f.i. out there. 4 cyl, V6, V8.
|
|
|
|
|
01-30-2012
|
#6 | |
|
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,453
|
Re: WTB: Fuel Injector Gaskets
Quote:
Rich
__________________
1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member |
|
|
|
|
|
01-31-2012
|
#7 |
|
Join Date: Feb 2010
Location: Arvada Colorado
Posts: 192
|
Re: WTB: Fuel Injector Gaskets
Or you could order a new plug from Rockauto for a a little over 6 bucks. I would think the gasket would be in a new one. It may not be a bad idea to have a few of these in the spare parts bin anyways
ACDELCO Part # PT2384  {#88862303} 2-WAY FEMALE BLACK  CONNECTOR,INJR-FUEL 2 DOORS; W/CENTERED INDEX SLOT W/RELEASE
|
|
|
|
|
01-31-2012
|
#8 | |
|
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,453
|
Re: WTB: Fuel Injector Gaskets
Quote:
 Rich
__________________
1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member |
|
|
|
|
|
01-31-2012
|
#9 |
|
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,816
|
Re: WTB: Fuel Injector Gaskets
I think I've been running without a few of those, I don't think it's likely to be a big deal unless the motor is being washed or otherwise gets very wet.
|
|
|
|
|
02-02-2012
|
#10 |
|
Join Date: Jul 2011
Location: Ft Myers Fl
Posts: 224
|
Re: WTB: Fuel Injector Gaskets
Sh*t come over here and I'll give you one.
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
