|
11-26-2011
|
#1 |
|
Join Date: Mar 2010
Location: Fort Worth, TX
Posts: 396
|
WTB: Stage 2 or 3 Cams
PM me if you have a set for sale.
Thanks |
|
|
|
11-26-2011
|
#2 |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: WTB: Stage 2 or 3 Cams
Pete might be able to help you out
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
11-27-2011
|
#3 |
 
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
Re: WTB: Stage 2 or 3 Cams
Pantera,i don't know what your looking for but if you have a set of stock cams i can regrind them.
These will work with any size motor. Set 1 .236 .425 Intake .220 .420 Exhaust 20-25HP over stock cams Set 2 .240 .440 Intake .224 .420 Exhaust 30-35HP over stock cams These will have a cammy idle but will drive like a stocker long or short trips and i tested these they work. You will need new lifters. I have tested a few sets of cams i discovered we don't need so much exhaust cam, our heads flow very well on the exhaust side. A friend with 427ci LT5 has .224 exhaust and ran 134+mph Just for comparison Stage 2 specs .237 .440 In & Ex Stage 3 specs .242 .445 In & Ex If you need more info you can email me petezr1@gmail.com Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage Last edited by Pete; 11-27-2011 at 04:07 AM. |
|
|
|
|
01-02-2012
|
#4 |
|
Join Date: Mar 2010
Location: Fort Worth, TX
Posts: 396
|
Re: WTB: Stage 2 or 3 Cams
Pete,
You say these will require new lifters, are you talking new stock lifters or lifters of a different size? |
|
|
|
|
01-02-2012
|
#5 | |
|
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
Re: WTB: Stage 2 or 3 Cams
Quote:
I use the Melling JB-2236 these look just like the stock lifter same dimensions. Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
