|
09-17-2011
|
#1 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,683
|
GM AC Blower Power Module Connector
The connector for my power module is totally gone and the wiring was dangerously exposed. Spades were pretty oxidized. I have been looking for the pigtail to this for a while. There are 2 connectors on the evaporator box for the power control module. One is a 2 cavity, and the other a 4 cavity w PRPL, BLK, and ORG wires. Both are female connectors. Looking at the FSM I find the GM # to be
12052023 for the 4 cavity and 12052024 for the 2 cavity. I'm looking for the 4 cavity pigtail Looking on the net, the closest I can find to this is a 12101931 and a 12101886. Both of these are 4 cavity. The 886 has 3 wires rather than 4. Does anybody know if the FSM # was superceded by either of these 2. They both seem to have the correct shape etc. Anybody have a source? |
|
|
|
09-17-2011
|
#2 |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,120
|
Re: GM AC Blower Power Module Connector
Dom these are the same as any C4. I suggest Pming WEBURKE over at the Corvette Forum. Decent guy. Tell him I sent you and if he has them they will be priced right. LMK either way. Daryll
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
09-17-2011
|
#3 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,683
|
Re: GM AC Blower Power Module Connector
 
|
|
|
|
|
09-17-2011
|
#4 | |
 Join Date: Oct 2004
Posts: 1,884
|
Re: GM AC Blower Power Module Connector
Quote:
12101931 is 4 wire and is NLA - BUT the ACD PT203 equivalent is used as a reference by most all connector vendors and it's out there all over the place. ACD IMAGE: http://webcaps.ecomm.gm.com/internet...rtNumber=PT203 On my '90 MY the connectors are 2 and 4 but only 3 are populated on the 4 and only 1 is populated on the 2. There's a cavity plug in the unused ones. You could use the PT203 and either transfer your cavity plug if there's one or buy a new cavity plug. For the '90MY the 12101886 (PT157) I believe would be correct. It's 3 wire and I believe the correct cavity is plugged. I'm not a hands on for the later '93+ MY but I would think it maybe the same. The 12101886 is still available from GM or ACD but expensive! CORRECTION! Maybe not so expensive! ACD image: http://webcaps.ecomm.gm.com/internet...rtNumber=PT157 Where's home? How close is Naperville? An empty body could be available also. You just assemble it! Interested? Last edited by WVZR-1; 09-17-2011 at 08:36 PM. |
|
|
|
|
|
09-17-2011
|
#5 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,156
|
Re: GM AC Blower Power Module Connector
He is close to me and about 20min from Naperville, maybe 30min
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
|
|
|
|
09-17-2011
|
#6 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,683
|
Re: GM AC Blower Power Module Connector
WV,
Thanks for the great response. I spotted those 2 connectors. My Z is a 92. The 2 cavity has 1 empty cavity, while the 4 cavity had only 3 wires, BLK/ORG/PRPL. So sounds like the 90. I think it's a matter of color, which is black not gray. I need the pigtail. There is no connector currently. I could build it with the right terminals but pigtail is easier. The ZR is a 92 Black Rose that I bought in December. I'm in Bartlett which is 12miles north of Naperville and about 4 miles NE of St. Charles ( very close to Bloomington Gold) |
|
|
|
|
09-17-2011
|
#7 | |
|
Join Date: Oct 2004
Posts: 1,884
|
Re: GM AC Blower Power Module Connector
Quote:
Precision Service and Parts - Wheeling A reasonable buy would be something less than $30 |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
