|
08-26-2011
|
#1 |
 Join Date: Jun 2007
Location: Pensacola, Florida
Posts: 14
|
Driving ZR 1 in wet weather
I have a 1991 ZR1. After driving it in wet weather,it creates a loud, screeching noise when it starts drying out. Took it to a knowleadgable Corvette mechanic. He told me to continue driving it, the noise would go away. He was right, but what causes the noise? Really embarrasing with all the noise.
|
|
|
|
08-26-2011
|
#2 |
|
Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,802
|
Re: Driving ZR 1 in wet weather
sounds like you might need a new serpentine belt. probably the rubber is really dried out.
|
|
|
|
|
08-26-2011
|
#3 |
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: Driving ZR 1 in wet weather
I agree w/ the belt being the probable culprit. While it is squeaking, spritz the belt with a little Windex. If it stops squeaking for a moment or so before resuming, you have your culprit...the belt! Try to find a Gates and avoid the Chinese crap...Unless, of course, you LIKE the sqeaking!
 If the belt isn't "IT", get back and we'll try something else. P.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|
|
|
08-27-2011
|
#4 |
 
Join Date: May 2008
Location: USA
Posts: 1,096
|
Re: Driving ZR 1 in wet weather
|
|
|
|
|
08-27-2011
|
#5 |
|
Join Date: Apr 2009
Location: Prather, CA
Posts: 809
|
Re: Driving ZR 1 in wet weather
Wow, that sounds a little too good to be true. A goodyear LT5 belt for less than $13? I thought you couldn't get the belt for our cars for much less than $50?
__________________
[IMG]http://i13.photobucket.com/albums/a292/bdw18_123/_zr1netforumsigphoto.jpg[/IMG][B] 1990 Corvette ZR-1 [/B][I] White/Flame Red, #2299, mostly stock, 144K miles.[/I] -Cams timed to the '93-'95 405HP LT5 stock timing. -IAT sensor relocated to below front bumper. -Haibeck hoops installed in airduct. -OBX cat-back exhaust. [COLOR=DarkRed][B](SOLD - December 2012 [/B][/COLOR][COLOR=DarkRed][B]:hello:)[/B][/COLOR] 1993 Corvette Coupe Black/Black, 6-speed (SOLD - October 2009 :hello:) |
|
|
|
|
08-29-2011
|
#6 |
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
|
Re: Driving ZR 1 in wet weather
I thought that was too good to be true also so I bought one in the spring and I have to say it works just fine. I was amazed that at the price point it would even fit let alone work.
I was even more leery when I saw the rib pattern as it was totally different from the G/Yr belt that I bought at a local chevy parts counter back in 05, and again in 07.....I was sure I had been taken for a ride but it fits & operates perfectly!  Tom
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
