|
04-09-2011
|
#11 | |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: RH upgraded Cam tensioner Group Buy.
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
04-09-2011
|
#12 |
 Join Date: Sep 2005
Posts: 90
|
Re: RH upgraded Cam tensioner Group Buy.
Please add me to the list for a "B" kit.
|
|
|
|
|
04-09-2011
|
#13 |
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
|
Re: RH upgraded Cam tensioner Group Buy.
Put me in for the "A" Kit please Kurt?
Thank You  Tom
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
|
|
|
|
08-25-2011
|
#14 |
 Join Date: Jul 2005
Location: Basel/Switzerland
Posts: 152
|
Re: RH upgraded Cam tensioner Group Buy.
Any news about the tensioner upgrade?
I am seriously interested and wouldn't mind to buy some kits. Maybe anybody has such a upgrade set for sale? Keep me informed. Sam |
|
|
|
|
08-27-2011
|
#15 |
|
Join Date: Jan 2010
Location: sotogrande spain
Posts: 38
|
Re: RH upgraded Cam tensioner Group Buy.
Hi Kurt, greetings from sunny Spain. This embarassing rattle that starts after a couple of seconds, and lasts about as long, could make some people secretly think my car is not as good as I say it is! I guess I need a "B" kit, please, and I suppose I will have to pay a bit extra for the extra postage. Normally I get things sent by USPS Priority Intl Service, which works perfectly, and if the package is labelled "used motor spares" or something similar, with a value of 40 dlrs or so, it seems to get through customs without a two week hold-up, 5 new forms for me to fill, and an extra 50% on the cost, to pay as taxes and administrative costs! So that would be extremely appreciated, if you could swing it!
Best regards, Dick
__________________
1990 ZR-1 #231 torch red/black |
|
|
|
|
08-27-2011
|
#16 |
 Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,802
|
Re: RH upgraded Cam tensioner Group Buy.
My car just started doing the start-up clatter the same week the odo cracked 30k...I'm definitely interested as well.
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
