Laser jammer install, anyone else done it? - ZR-1 Net Registry Forums

Alberta_ZR1 · 05-10-2011

My lovely city is laser happy and they're getting worse.

So I have decided to install a decent laser jammer to work with my detector. The only issue I'm running into is where to mount the transponders (sensors). Since we have no grill or openings anywhere on the front of the car, the only place I can think of is under the nose.

Just curious if someone has installed a jammer on their Corvette and where they have put the transponders. Some pictures would be helpful.

Thanks

Example of an install on a C6 - there is only two transponders in the kit I'm looking at

Ty

Kevin · 05-10-2011

i think the pinapple express had one installed...and quite a few other things too. i know mark haibeck worked on the car and i'm not sure who put it in to begin with but maybe you could contact him and see if he has any ideas

mike100 · 05-10-2011

Illegal in Cali (the jammers), but they don't use laser very often here. Ideally, the hidden system seems like the best option, I always hated having the detector in sight.

There is a square air scoop part you can buy from MAM that helps keep grit and debris out of the radiator inlet and it would have a horizontal surface that goes back several inches into the duct in which you could mount the sensors.
shown here

I saw in Edmonton that they actually have radar speed cams disguised as trash cans (wheelie-bins) that they put out on trash day. I'm not too fond of the municipalities camera minivans up in Ft Mac either.

GOLDCYLON · 05-10-2011

I have heard of behind the front license plate filler

Alberta_ZR1 · 05-10-2011

Quote:

Originally Posted by mike100

Illegal in Cali (the jammers), but they don't use laser very often here. Ideally, the hidden system seems like the best option, I always hated having the detector in sight.

There is a square air scoop part you can buy from MAM that helps keep grit and debris out of the radiator inlet and it would have a horizontal surface that goes back several inches into the duct in which you could mount the sensors.
shown here

I saw in Edmonton that they actually have radar speed cams disguised as trash cans (wheelie-bins) that they put out on trash day. I'm not too fond of the municipalities camera minivans up in Ft Mac either.

Good call on the air scoop. The only other spot to put the transponders is upside down from the front bumper and then set them in a little bit. There isn't much else to mount them to.

Unfortunately, a detector only works if he shoots the car in front of me first.

GOLDCYLON · 05-18-2011

Quote:

Originally Posted by Alberta_ZR1

Good call on the air scoop. The only other spot to put the transponders is upside down from the front bumper and then set them in a little bit. There isn't much else to mount them to.

Unfortunately, a detector only works if he shoots the car in front of me first.

Plenty of room on the BMAD for mounting but it would be very visable a few feet from the front of the car.

05-10-2011	#1
Alberta_ZR1 Join Date: Jul 2010 Location: Calgary Alberta Posts: 191	Laser jammer install, anyone else done it? My lovely city is laser happy and they're getting worse. So I have decided to install a decent laser jammer to work with my detector. The only issue I'm running into is where to mount the transponders (sensors). Since we have no grill or openings anywhere on the front of the car, the only place I can think of is under the nose. Just curious if someone has installed a jammer on their Corvette and where they have put the transponders. Some pictures would be helpful. Thanks Example of an install on a C6 - there is only two transponders in the kit I'm looking at Ty __________________ [SIZE=1][SIZE=2]Tyler[/SIZE] [SIZE=1]1993 ZR-1 - Polo Green[/SIZE] [/SIZE]

05-10-2011	#2
Kevin Join Date: Jun 2005 Location: pittsburgh Posts: 4,632	Re: Laser jammer install, anyone else done it? i think the pinapple express had one installed...and quite a few other things too. i know mark haibeck worked on the car and i'm not sure who put it in to begin with but maybe you could contact him and see if he has any ideas __________________ It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B"

05-10-2011	#3
mike100 Join Date: Feb 2011 Location: San Marcos CA Posts: 1,802	Re: Laser jammer install, anyone else done it? Illegal in Cali (the jammers), but they don't use laser very often here. Ideally, the hidden system seems like the best option, I always hated having the detector in sight. There is a square air scoop part you can buy from MAM that helps keep grit and debris out of the radiator inlet and it would have a horizontal surface that goes back several inches into the duct in which you could mount the sensors. shown here I saw in Edmonton that they actually have radar speed cams disguised as trash cans (wheelie-bins) that they put out on trash day. I'm not too fond of the municipalities camera minivans up in Ft Mac either.

05-10-2011	#4
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: Laser jammer install, anyone else done it? I have heard of behind the front license plate filler __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode