|
03-14-2011
|
#1 |
 
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,467
|
Crankshaft Position Sensor
I am getting a slow seeping leak starting from my crankshaft position sensor. Is there an O-ring or gasket that can be replaced, any concerns when removing / re-installing?
Thanks Rich
__________________
1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member |
|
|
|
03-14-2011
|
#2 |
|
Join Date: Jul 2009
Location: Redding Calif
Posts: 223
|
Re: Crankshaft Position Sensor
Here ya go.... I just did the job.
http://www.zr1.net/forum/showthread.php?t=14095 -and- http://forums.*************.com/c4-z...r-removal.html I got the O ring at NAPA (as suggested by LGAFF) in a A/C O ring kit. So far it is working just fine. If you need the exact specs for the O ring, drop me a PM as I got them from Jerrys Gaskets if you need them. Jerry doesn't carry them. (The second URL is on the CF forum)
__________________
1994 ZR-1 # 0102...SOLD Last edited by ittlfly; 03-14-2011 at 08:11 PM. |
|
|
|
|
03-14-2011
|
#3 |
|
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,467
|
Re: Crankshaft Position Sensor
This is the sensor that's leaking....this is the crankshaft position sensor...right?
__________________
1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member |
|
|
|
|
03-14-2011
|
#4 |
|
Join Date: Jul 2009
Location: Redding Calif
Posts: 223
|
Re: Crankshaft Position Sensor
That picture doesn't look like mine. Crank sensor is on the passenger side, cam positioning sensor is on the drivers side. The cam sensor has flat bottom. That picture really isn't showing that. If that's the dip stick just to the left of the sensor, its the crank sensor you are dealing with.
__________________
1994 ZR-1 # 0102...SOLD |
|
|
|
|
03-15-2011
|
#5 |
Join Date: May 2005
Location: Leesburg, VA
Posts: 2,713
|
Re: Crankshaft Position Sensor
Rich, that is exactly what the crank sensor looks like, according to the Fuel and Emissions training guide.
__________________
Bob Saveland Former owner of #2517 [IMG]http://a.random-image.net/aurora40/vette.jpg[/img] |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
