Code 61 - ZR-1 Net Registry Forums

John Boothby · 09-15-2010

It does not set a code when secondaries are disabled. Only when the power key is on "Full Power". Also, the rpm is not limited. It also seems like I am getting full power, so I am thinking "sensor" as in MAP. I have two new MAP sensors (behind plenum and under brake vac can). I will try them and see what happens before removing the plenum again.

Thanks again for the replies. Any more suggestions, let me know.

09-15-2010	#11
John Boothby Join Date: Jul 2005 Location: Las Vegas, Nevada Posts: 777	Re: Code 61 It does not set a code when secondaries are disabled. Only when the power key is on "Full Power". Also, the rpm is not limited. It also seems like I am getting full power, so I am thinking "sensor" as in MAP. I have two new MAP sensors (behind plenum and under brake vac can). I will try them and see what happens before removing the plenum again. Thanks again for the replies. Any more suggestions, let me know. __________________ JB 1990 #148 Red/Saddle Haibeck AYBKG5 Chip/RC Engineering/Flowmasters/K&N/Samco/Fuzzy Dice :cheers: