OEM injectors - ZR-1 Net Registry Forums

jrd1990zr1 · 08-16-2010

I switched out my injectors last winter with a set I got from FIC. I am considering putting my originals back in for judging purposes after my trip to Carlisle. What is the lower threshold for injector resistance when the injector is shot?? Most primaries are in the 12-12.5 range. One is 9.0, 9.7 and 9.9 and one is 7.7. If I were to re-install them, any suggestions on which cylinders I should use them in?

Likewise my secondaries are all around 12-12.5 except one which reads 3.2.

My main concern is the primaries since I can always refrain from kicking in the secondaries with a bad injector for the short trip to a judging meet.

Thanks, John

08-16-2010	#1
jrd1990zr1 Join Date: Dec 2005 Location: Delanson, NY Posts: 925	OEM injectors I switched out my injectors last winter with a set I got from FIC. I am considering putting my originals back in for judging purposes after my trip to Carlisle. What is the lower threshold for injector resistance when the injector is shot?? Most primaries are in the 12-12.5 range. One is 9.0, 9.7 and 9.9 and one is 7.7. If I were to re-install them, any suggestions on which cylinders I should use them in? Likewise my secondaries are all around 12-12.5 except one which reads 3.2. My main concern is the primaries since I can always refrain from kicking in the secondaries with a bad injector for the short trip to a judging meet. Thanks, John