![]() |
#15 |
![]() Join Date: Apr 2009
Location: Portland OR
Posts: 173
|
![]() Primary: 35.5MM at the Plenum tapered to 34.5 at the head. I Port matched at the head and I used a break Cylinder Hone to taper the top of the head. Only about 1.5 inch. (see picture I will Add.) I've been taking it very slow. I can always take more out later but I can't put it back. Last edited by Eric870; 06-19-2010 at 10:42 PM. |
![]() |
![]() |
|
|