Fast Idle - ZR-1 Net Registry Forums

terry mckeown · 05-05-2010

Thanks Jerry for the info. I will probably pull the plenum again next week and check to fit of the new injectors, I did oil the O rings in the primarys and put oil on all the O rings on the injectors, however inserting them in the holes in the injector housing was tight and maybe I was too rough. Is it possible that one of the O rings moved or came out of the groove?
I have sniffed all the vacuum lines and connections and around the joint where the plenum meets the injector housing with propane twice and still no luck. I do know that the 2 lines under the plenum are connected could see them with a flashlite. Another question I have if if the PCV is faulty how would that effect the idle.
Thanks again to all for the help.

05-05-2010	#7
terry mckeown Join Date: Apr 2008 Location: Cambridge, ON. Canada Posts: 14	Re: Fast Idle Thanks Jerry for the info. I will probably pull the plenum again next week and check to fit of the new injectors, I did oil the O rings in the primarys and put oil on all the O rings on the injectors, however inserting them in the holes in the injector housing was tight and maybe I was too rough. Is it possible that one of the O rings moved or came out of the groove? I have sniffed all the vacuum lines and connections and around the joint where the plenum meets the injector housing with propane twice and still no luck. I do know that the 2 lines under the plenum are connected could see them with a flashlite. Another question I have if if the PCV is faulty how would that effect the idle. Thanks again to all for the help.