C6 Z06 wheel alignment - ZR-1 Net Registry Forums

XfireZ51 · 04-23-2010

Having recently put on C6 Z wheels and tires, Pete was good enough to also give me a set of lowering bolts. Installed those last weekend so it was time to check and re-do alignment if necessary. Took ZR to Suburban Tire on Lake Street in Hanover Park. Ralph does the alignments with an awesome Hunter machine. Ralph is a Corvette brother,
being the owner of a Briar Blue/Black 1972 LT-1. He added Brodix heads.
Goes without saying, Ralph "appreciates" Vettes and Vette owners.
I would HIGHLY recommend using him for your alignment if you are in the neighborhood. Excellent and THOROUGH service. Ralph took over 2 hours doing the front and rear. Rear wasn't too bad. Fronts were off by 1 and 1.8d. Did a great job. A posting a picture of him and of the before/after alignment specs from the Hunter. BTW, the cost for this was $113. Super.

We used JeffVs street handling spec as close as we could get. Got camber back near spec. Turn in seems more responsive. Tracks nicely!

04-23-2010	#1
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,709	C6 Z06 wheel alignment Having recently put on C6 Z wheels and tires, Pete was good enough to also give me a set of lowering bolts. Installed those last weekend so it was time to check and re-do alignment if necessary. Took ZR to Suburban Tire on Lake Street in Hanover Park. Ralph does the alignments with an awesome Hunter machine. Ralph is a Corvette brother, being the owner of a Briar Blue/Black 1972 LT-1. He added Brodix heads. Goes without saying, Ralph "appreciates" Vettes and Vette owners. I would HIGHLY recommend using him for your alignment if you are in the neighborhood. Excellent and THOROUGH service. Ralph took over 2 hours doing the front and rear. Rear wasn't too bad. Fronts were off by 1 and 1.8d. Did a great job. A posting a picture of him and of the before/after alignment specs from the Hunter. BTW, the cost for this was $113. Super. We used JeffVs street handling spec as close as we could get. Got camber back near spec. Turn in seems more responsive. Tracks nicely! Last edited by XfireZ51; 04-23-2010 at 06:33 PM.