Anyone have a Kwik Lift?

[Dynomite]

Originally Posted by Jagdpanzer

Use a come-a-long

Got the Kwiklift (RED) ........just got done setting it up
I used a wire rope come-a long with a chain to pull the Z backwards up on the Kwiklift pulling from a 1-1/2 x 1-1/2 x 45 inch steel box section placed horizontally across the rear of Kwiklift.....Jagdpanzer's idea of using a come-a-long worked great

It worked so well that I am going to weld up a padeye at the center of two 1-1/2 x 1-1/2 x 45 inch steel box sections welded side by side (1-1/2 x 3 x 45 inch steel beam). I will weld two hangers (one on each end). I can just hang the 1-1/2 x 3 x 45 inch steel beam on the end of Kwiklift to pull from the center padeye between each ramp with a come-a-long attached to the rear or front of any vehicle.

I will call this steel beam KLUTZ (KwikLift Utility Towbar for Zs)

Pictures next post.

I have four stalls in this shed (garage for those in CA). One stall will be used for parts