My first plenum pull! - ZR-1 Net Registry Forums

rudolph schenker · 02-21-2010

I have wanted to get my plenum and cam covers refinished, so I contacted Jeff Flint and he gave me instructions for the process.

So far it has not been too bad I have my FSM and have been taking a lot of pics of the disassembly. I must admit the vacuum lines are quite intimidating ( I hope I can get them back together).

I took some pics of the injectors and wanted to know if they look normal. Car is a 94 with only has 28k.

Should I have Marc H. check these and test them?

Are there any tips or "do it while you are there" recommendations? All I have left to do is pull the brake booster then I can get the cam covers off and ship it all to Jeff.

02-21-2010	#1
rudolph schenker Join Date: Jun 2009 Location: utah Posts: 128	My first plenum pull! I have wanted to get my plenum and cam covers refinished, so I contacted Jeff Flint and he gave me instructions for the process. So far it has not been too bad I have my FSM and have been taking a lot of pics of the disassembly. I must admit the vacuum lines are quite intimidating ( I hope I can get them back together). I took some pics of the injectors and wanted to know if they look normal. Car is a 94 with only has 28k. Should I have Marc H. check these and test them? Are there any tips or "do it while you are there" recommendations? All I have left to do is pull the brake booster then I can get the cam covers off and ship it all to Jeff. __________________ 1994 ZR-1 Admiral blue/beige #67