My '90 ZR-1 project update thread - ZR-1 Net Registry Forums

bdw18_123 · 09-10-2009

Thought I'd start a new thread and post updates and pictures as I progress. Go to this link to for the beginnings of this project:

http://www.zr1.net/forum/showthread....ight=bdw18_123

I'm still in the 'cleaning everything real good' stage, which is turning out to be a very large project just by itself. I just can't stand putting something back together dirty, even if it takes a lot of work to get it clean.

The previous owner replaced the fuel injectors, but I didn't know where he got them from. Then I happened to look in the bag of the old, original injectors and I found these:

Which was a pleasant surprise as I have heard nothing but glowing reviews about FIC, so I know the injectors are good quality.

Here are a few before and after clean-up pics:

Fuel injector rails & IH's before

Fuel injectors & rails after (also installed the new fuel pressure regulator, which came with the car)

IH assemblies after

09-10-2009	#1
bdw18_123 Join Date: Apr 2009 Location: Prather, CA Posts: 809	My '90 ZR-1 project update thread Thought I'd start a new thread and post updates and pictures as I progress. Go to this link to for the beginnings of this project: http://www.zr1.net/forum/showthread....ight=bdw18_123 I'm still in the 'cleaning everything real good' stage, which is turning out to be a very large project just by itself. I just can't stand putting something back together dirty, even if it takes a lot of work to get it clean. The previous owner replaced the fuel injectors, but I didn't know where he got them from. Then I happened to look in the bag of the old, original injectors and I found these: Which was a pleasant surprise as I have heard nothing but glowing reviews about FIC, so I know the injectors are good quality. Here are a few before and after clean-up pics: Fuel injector rails & IH's before Fuel injectors & rails after (also installed the new fuel pressure regulator, which came with the car) IH assemblies after __________________ [IMG]http://i13.photobucket.com/albums/a292/bdw18_123/_zr1netforumsigphoto.jpg[/IMG][B] 1990 Corvette ZR-1 [/B][I] White/Flame Red, #2299, mostly stock, 144K miles.[/I] -Cams timed to the '93-'95 405HP LT5 stock timing. -IAT sensor relocated to below front bumper. -Haibeck hoops installed in airduct. -OBX cat-back exhaust. [COLOR=DarkRed][B](SOLD - December 2012 [/B][/COLOR][COLOR=DarkRed][B]:hello:)[/B][/COLOR] 1993 Corvette Coupe Black/Black, 6-speed (SOLD - October 2009 :hello:) Last edited by bdw18_123; 04-23-2010 at 11:13 PM.