Water Pump Removal - ZR-1 Net Registry Forums

ralph92ZR1 · 09-02-2009

Need some advice. I am removing the water pump to replace the gasket. Have all the bolts loose. To revove the A/C compressor bolt from the pump housing, is it the bolt going down vertical from the left side of the A/C pulley housing as you look at the front to back? Or is it the bolt going in from the water pump housing toward the engine? What is a good way to break the pump loose from the gasket since there is not a good surface of the pump housing to tap with a rubber hammer??

Thanks for the advice !!!

09-02-2009	#1
ralph92ZR1 Join Date: Dec 2005 Location: Shillington, Penna. Posts: 67	Water Pump Removal Need some advice. I am removing the water pump to replace the gasket. Have all the bolts loose. To revove the A/C compressor bolt from the pump housing, is it the bolt going down vertical from the left side of the A/C pulley housing as you look at the front to back? Or is it the bolt going in from the water pump housing toward the engine? What is a good way to break the pump loose from the gasket since there is not a good surface of the pump housing to tap with a rubber hammer?? Thanks for the advice !!! __________________ [FONT=Franklin Gothic Medium]Ralph E. Weise [/FONT]:) '92 ZR-1#473 Red/Red