exhaust gas temperature, flow, and volume data - ZR-1 Net Registry Forums

xxxscimitarxxx · 08-17-2009

basically l want to know the exhaust muffler end temps, flows, and volumes for a range of speeds so as to be able to graph them....1000-7500 in increments

alternatively if the data is not available, does anyone have a suggestion for a specific flow and volume tool (something to shove on the end of the pipe) temps l can do with a thermocouple

all can be considered from theory I guess.....

compression volume+(bore cross section area X stroke) X 1 RPM = 5.7 ltr....

However, working out the difference on gas volumes and flows from the header to the muffler resulting from the drop in exhaust gas temperature are a little too much thermodynamic theory for me to figure

Reason.....Im doing some detail remote turbo sizing calc checks

Dave

08-17-2009	#1
xxxscimitarxxx Join Date: Mar 2008 Location: England Posts: 219	exhaust gas temperature, flow, and volume data basically l want to know the exhaust muffler end temps, flows, and volumes for a range of speeds so as to be able to graph them....1000-7500 in increments alternatively if the data is not available, does anyone have a suggestion for a specific flow and volume tool (something to shove on the end of the pipe) temps l can do with a thermocouple all can be considered from theory I guess..... compression volume+(bore cross section area X stroke) X 1 RPM = 5.7 ltr.... However, working out the difference on gas volumes and flows from the header to the muffler resulting from the drop in exhaust gas temperature are a little too much thermodynamic theory for me to figure Reason.....Im doing some detail remote turbo sizing calc checks Dave Last edited by xxxscimitarxxx; 08-17-2009 at 09:21 AM.