Help please with clutch master cylinder - ZR-1 Net Registry Forums

QB93Z · 08-11-2009

Sal,

The problem that I see with pressure bleeders like the one you linked to is that you have to make sure that the line you connect to the bleeder port on the slave cylinder is free of air when you start or you are introducing more air into the system.

Also, when you pressure bleed from the bottom (slave cylinder), you will overflow the reservoir and spill fluid down the sides of the reservoir to the area you are concerned about. If you wrap a rag around the reservoir you may be able to catch the overflow.

Jim

08-11-2009	#20
QB93Z Join Date: May 2007 Location: Westminster, Maryland Posts: 3,689	Re: Help please with clutch master cylinder Sal, The problem that I see with pressure bleeders like the one you linked to is that you have to make sure that the line you connect to the bleeder port on the slave cylinder is free of air when you start or you are introducing more air into the system. Also, when you pressure bleed from the bottom (slave cylinder), you will overflow the reservoir and spill fluid down the sides of the reservoir to the area you are concerned about. If you wrap a rag around the reservoir you may be able to catch the overflow. Jim