|
07-25-2009
|
#1 |
 
Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
|
Rear Spring issue
I noticed my car was sitting lower on the driver side. I wanted to lower it down some anyway, so I bought the longer bolts and did so. I couldnt get it even in the back with the new bolts. I had to use a new one and a stock one in conjunction. It looks good and even, but now it scrapes the resonator on dips while cruising.
Is my spring worn out too far? Is that why I couldnt use both long bolts?
__________________
[B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B] |
|
|
|
|
Threaded Mode