91 ZR-1 Cutting Out Under Load

[GregCrowe]

Originally Posted by XfireZ51

Greg,

Try fitting some spade lugs in the slots and then connecting Ohmeter to them.

Spades wouldn't even fit up in those tiny slots. I did however use some wires.

Testing of the original GM coils got me:

Primary / Secondary
1. .6 ohms / 5.63 k-ohms
2. .6 ohms / 5.57 k-ohms
3. .6 ohms / zero
4. .6 ohms / zero

All the stock coils look fine on the primary readings. The secondary readings do look suspect.

I'll try to pull the Summit/Accel coils and get a primary reading on them today if possible.