ZR-1 and Shebly wheels ( Polishing and cleaning) - ZR-1 Net Registry Forums

-=Jeff=- · 12-25-2008

I need to disassemble my Shelby wheels to clean them up mostly..

When I put them back together, what should I torque the bolts to?
I plan on using loctite on the bolts as well, but was curious on the torque spec

3 of the 4 barrels need to be cleaned and polished.. one center needs paint so I might paint all 4..

I am in no rush to get them ready, as my 17" tires are still good.

As for the barrels, I tried, Adams and Mothers without success.. So do I try polishing compound first? or should I use 1500 grit sandpaper to get them clean (Salt damage)

12-25-2008	#1
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	ZR-1 and Shebly wheels ( Polishing and cleaning) I need to disassemble my Shelby wheels to clean them up mostly.. When I put them back together, what should I torque the bolts to? I plan on using loctite on the bolts as well, but was curious on the torque spec 3 of the 4 barrels need to be cleaned and polished.. one center needs paint so I might paint all 4.. I am in no rush to get them ready, as my 17" tires are still good. As for the barrels, I tried, Adams and Mothers without success.. So do I try polishing compound first? or should I use 1500 grit sandpaper to get them clean (Salt damage) __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 Last edited by -=Jeff=-; 12-26-2008 at 12:14 AM.