LT5 Gaskets & Seals

[A26B]

LT5 Gaskets & Seals

I just added LT5 valve stem seals and a thicker than OEM plenum gasket (0.047" compared to 0.031") to my products list, so I'm taking the opportunity to repost the list.

The 375 hp engine pan gasket has been modified from the stock configuration by increasing the width of the gasket approximately 50% on the front & rear of the pan, where it's most prone to leakage. Compressed thickness is virtually identical to the OEM gasket.

My oil pump pickup tube seal (o-ring) cross section diameter has been increased compared to the OEM part to obtain the proper design compression for use with either my pan gasket or the GM gasket.

Also added:

Dipstick tube seal 90~95 MY
Oil Pump Pickup Tube Seal 93~95 MY
Head Gaskets 90~95 MY
Stainless Steel Bolt Kits 90~95 MY
Gasket & Seal "Kits" 90~95 MY (several different levels available from basic injector service to complete overhaul)
Viton Fuel System Seals 90~95 MY
Bolts...... & More Bolts

PARTS, lots of new & used OEM parts

and...... currently being manufactured for Jerrys Gaskets
Bolt, Camshaft Sprocket 90~95 MY
Seat, Valve Spring 90~95 MY

WWW.JERRYSGASKETS.COM

Thanks to all who have purchased gaskets & seals.... I appreciate your orders.