10 PSI dyno numbers are in... - ZR-1 Net Registry Forums

RHanselman · 05-02-2008

OK here are the 10 psi numbers. We did two back to back and they were within decimals...

616.56 rwhp & 574.97 rwtq

We didn't get a chance to put the high flow pumps in so we stopped while we still had fuel. We'll change the pumps after BG and push her up a few pounds

I want to give special thanks to the following:

Jerry Downey... without him this would not have happened!
Ron Woods
Marc Haibeck
Aaron Scott
Corey Henderson
Gil Nevarez Racing Products (his experience with race applications/mult ovhd cam eng builds/and tuning)

05-02-2008	#1
RHanselman Join Date: Jul 2005 Location: Cresson, TX Posts: 970	10 PSI dyno numbers are in... OK here are the 10 psi numbers. We did two back to back and they were within decimals... 616.56 rwhp & 574.97 rwtq We didn't get a chance to put the high flow pumps in so we stopped while we still had fuel. We'll change the pumps after BG and push her up a few pounds I want to give special thanks to the following: Jerry Downey... without him this would not have happened! Ron Woods Marc Haibeck Aaron Scott Corey Henderson Gil Nevarez Racing Products (his experience with race applications/mult ovhd cam eng builds/and tuning) __________________ Ron Hanselman Founding Member #80 CM Lifetime Member #1093 1991 #383 Twin Turbo 1993 #099 Ruby, Jeal 368 w/Snake Skinner body 1961 White with Red Int Last edited by RHanselman; 05-03-2008 at 08:39 AM.