ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-05-2008   #1
Arctic91
 
Arctic91's Avatar
 
Join Date: Nov 2007
Location: Sykesville, MD
Posts: 371
Default What is this?

So, after some encouragement from Uly (thanks!! I needed that), I decided to dive into a plenum pull/injector replacement myself tonight - instead of paying a few guys to help out.

The plenum is off, new wires are on, new injectors are in the rail and I'm ready to start buttoning it back up... then I see this horrendous-looking thing runing from one bank to the other under where the rear of the plenum should go: http://i256.photobucket.com/albums/h...1/IMG_1705.jpg. I have no idea how I didn't notice the condition of the hose during the removal - it's nearly cracked in half at three places!

I an 98% sure that this is the PCV hose and valves, but before I go off and order a new ones, I thought I'd make sure that I am asking for the right parts and see if anyone knows of a more economical solution than ordering from Kurt White? I'll call the local Autozone, Checkers, NAPA, etc. tomorrow, but I'm not optimistic that I'll find what I need local.

Thanks!!
Arctic91 is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:23 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025