Not hard to see why... - ZR-1 Net Registry Forums

flyin ryan · 03-21-2008

i've driven a ZO6, only up to 171 MPH on a slight curve, i've had a crate LS7 on the floor of my shop but yesterday i finally had a chance to see what i've been waiting for. a customer dropped off a set of LS7 heads & intake for me to port. it's not hard to see why those things make decent jam. the exhaust port itself is not too far off some of the 15Â°/18Â° inline valve & splayed valve Super Stock/Competition Eliminator stuff i've done. i told the guy not to expect any big gains, that i would do what i could. i think the valve angle is around 12Â° stock. nice stuff.

03-21-2008	#1
flyin ryan Join Date: Aug 2006 Location: Edmonton, Alberta or Phoenix, Arizona Posts: 2,741	Not hard to see why... i've driven a ZO6, only up to 171 MPH on a slight curve, i've had a crate LS7 on the floor of my shop but yesterday i finally had a chance to see what i've been waiting for. a customer dropped off a set of LS7 heads & intake for me to port. it's not hard to see why those things make decent jam. the exhaust port itself is not too far off some of the 15Â°/18Â° inline valve & splayed valve Super Stock/Competition Eliminator stuff i've done. i told the guy not to expect any big gains, that i would do what i could. i think the valve angle is around 12Â° stock. nice stuff. __________________ There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y.