ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-02-2022   #1
Zedder94
 
Join Date: Jun 2022
Location: Arroyo Grande CA
Posts: 8
Default 1994 ZR1 Code H64

Hi guys,

Wanted to reach out to you all and ask a couple questions. My 94 ZR1 is throwing a H64 code (As you all know - RHS Front O2 sensor lean). It will come in after it has warmed up and goes into closed loop operation, approx 10 minutes of driving. The car has 63K miles. No rough idle or rough running through the rev range.

From my research i was going to replace the RHS O2 sensor (prior to the CAT) After getting under the car the O2 sensor is in a shocking position to access! Any info or secrets on getting to the sensor? I was thinking of dropping the CAT to do so. I cannot see any other way.

I was thinking the O2 sensor would be the easiest try at fixing the code, I have read on here that injectors could cause it also. Wanted to change out sensor prior to injectors.

Any info is appreciated fellas. Cheers,

Jay.
Zedder94 is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:44 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020