Need your ideas - LT5 won?t turnover - ZR-1 Net Registry Forums

lfalzarano · 02-10-2022

The car has been in a shop for 3 months to repair the clutch hydraulics (master and slave cylinders) and replace the clutch. The battery was replaced last week, but the mechanic says nothing happens when he tries to start it (will not crank). The LT5 had no engine problems even after the transmission failures when I drove it last.

I know they must have moved the ECU when they replaced the clutch master cylinder. I also know that you have to disconnect the clutch pedal to the clutch master cylinder when replacing it.

Suggestion on a possible solution would be appreciated.

Sent from my iPhone using ZR-1 Net Registry

02-10-2022	#1
lfalzarano Join Date: Feb 2011 Location: Clayton, North Carolina Posts: 1,133	Need your ideas - LT5 won?t turnover The car has been in a shop for 3 months to repair the clutch hydraulics (master and slave cylinders) and replace the clutch. The battery was replaced last week, but the mechanic says nothing happens when he tries to start it (will not crank). The LT5 had no engine problems even after the transmission failures when I drove it last. I know they must have moved the ECU when they replaced the clutch master cylinder. I also know that you have to disconnect the clutch pedal to the clutch master cylinder when replacing it. Suggestion on a possible solution would be appreciated. Sent from my iPhone using ZR-1 Net Registry __________________ Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR] Last edited by lfalzarano; 02-10-2022 at 02:50 PM.