Another dumb question of the day - ZR-1 Net Registry Forums

sleazy rider · 08-25-2021

back in march my clutch slave started to leave a puddle on the floor and i had to pump the clutch to get a full peddle every time i would go to start it after it had set all night. the slave and the master looked to be the original from the factory so i pulled them out and sent them to the zfdoc to get rebuilt. eventually, for other reasons, i ended up pulling the engine and transmission and the front cradle and now i am in the process of putting everything in its place. now, 5-6 months later, i have a relay that i cannot figure out where it attaches to on the car. it comes out of the loom in front of the brake booster and has about 12" of wire so i have scoured everywhere on the firewall, the frame and the lower rear wheel house looking for 2 screw holes that matches the bracket.

am i blind?

anyway, i am in need of an extra set of eyes to place this relay in it's correct location.

thanks all.

08-25-2021	#1
sleazy rider Join Date: Jan 2020 Location: conroe, tx Posts: 87	Another dumb question of the day back in march my clutch slave started to leave a puddle on the floor and i had to pump the clutch to get a full peddle every time i would go to start it after it had set all night. the slave and the master looked to be the original from the factory so i pulled them out and sent them to the zfdoc to get rebuilt. eventually, for other reasons, i ended up pulling the engine and transmission and the front cradle and now i am in the process of putting everything in its place. now, 5-6 months later, i have a relay that i cannot figure out where it attaches to on the car. it comes out of the loom in front of the brake booster and has about 12" of wire so i have scoured everywhere on the firewall, the frame and the lower rear wheel house looking for 2 screw holes that matches the bracket. am i blind? anyway, i am in need of an extra set of eyes to place this relay in it's correct location. thanks all.