Rear brakes sticking lightly & Brake light comes on and off

[32valvesftw]

Originally Posted by staminqia

What kind of a repair did you do to the wiring harness? were your brakes sticking or just the light came on and off?
any help here would be appreciated.

I pulled the harness apart disconnected the wires cut them and installed new ends then stuck them back into the harness. How bad are your brakes sticking? Did the shop check and record pad thicknesses. Normally if a caliper is stuck the pads will wear prematurely and one will wear more than the others. Disconnect the harness and see if the light stays on. It was several years ago, so details are sketchy.
As others have mentioned any competent shop can assess your braking system. These are not very complicated braking systems.
If the wiring is OK I would think you have an issue with master cylinder leaking internally and causing a temporary imbalance in the system when you apply the brakes.