03-11-2021 | #1 |
Join Date: Sep 2018
Location: Florida
Posts: 305
|
Capping the coolant line to plenum
Curious as to methods used by forum members for capping or plugging the coolant line which runs along the intake plenum in the passenger side and f the engine. I am having my injector housings tapped and plugged so no more coolant through the plenum. I would like to keep all lines in place for the factory appearance. I am wondering if someone has already done this. What I had in mind was say a piece of 3/8 aluminum dowel rod pressed into the coolant hose coming off the surge tank with several hose clamps on that portion of hose to create the plug. I would have this rod pressed into the hose far enough that I could still fit the hose to the hard line off the plenum to secure.
If someone has done this, I would like to hear the details or pictures. |
|
|