After Market Targa Top Not Fitting - ZR-1 Net Registry Forums

aj94zr1 · 09-23-2020

I have 2 Targa Tops, both fit my Z perfect. So I bought a replacement after market from Ecklers,

https://www.ecklerscorvette.com/corv...1989-1996.html

While the other 2 fit flush, when this one came in, it does not. It sticks out in the front about 1 inch high.

So I tried taking all the brackets off to see if it would fit flush, it would not.

I adjusted the front bracket, it helped a little bit but my question is when adjusting the back I don't see how I could adjust it to make it go further back to where the top could fit in flush.

Very frustrating other 2 are perfect and this one is not. When I emailed Ecklers for help they said "I don't know take it to a body shop." THANKS!!

Hoping to find someone who has bought this part from them.

09-23-2020	#1
aj94zr1 Join Date: Jul 2020 Location: Louisiana Posts: 24	After Market Targa Top Not Fitting I have 2 Targa Tops, both fit my Z perfect. So I bought a replacement after market from Ecklers, https://www.ecklerscorvette.com/corv...1989-1996.html While the other 2 fit flush, when this one came in, it does not. It sticks out in the front about 1 inch high. So I tried taking all the brackets off to see if it would fit flush, it would not. I adjusted the front bracket, it helped a little bit but my question is when adjusting the back I don't see how I could adjust it to make it go further back to where the top could fit in flush. Very frustrating other 2 are perfect and this one is not. When I emailed Ecklers for help they said "I don't know take it to a body shop." THANKS!! Hoping to find someone who has bought this part from them. __________________ [B]1994 ZR-1[/B] [COLOR=Red]Torch Red[/COLOR] [COLOR=Olive]Beige Interior[/COLOR] [I]#187[/I]