LT5 Miscellaneous Parts - ZR-1 Net Registry Forums

Ccmano · 03-29-2020

LT5 Parts
Great parts still available, feel free to make an offer. I am finalizing the parting out of a 1990 LT5 engine. Only these miscellaneous parts remain. The engine was in storage for the past few years that I am aware of. Not sure exactly how long. It reportedly had ~35k miles when removed. All the remaining parts I have available now are listed here. Im open to offers on everything especially multiple items. Prices listed do not include shipping. PM to make offers. Payment via PayPal only. The whole lot is available for a significant discount.
H

Injector Housing bolt set. $25
Throttle body bolt set $25
Fuel Pressure regulator vacuum line $15
MAP Sensor with plenum bracket $55
MDPS Sensor with the ECM bracket $55
Secondary throttle plate arms, washers, nuts set $79
Secondary linkages and mounting brackets with bolts $65
AC compressor, functional, no clutch $129
IAC Motor $25
Intake air temp sensor $25
[B]Both under plenum water temp sensors $35
Drive shaft with the yoke attached $149
Cam cover vent lines 1 driver side available $20 ea.
2 Flywheel bolt sets $39 ea
2 New Knock Modules (90 only) $99 ea.
Power steering bracket with bolts $39
Water pump pulley with screws $39
Right and left engine mount brackets with bolts $70
Vacuum line keeper with bolts, mounts to PS reservoir $35
1 set ground bolts to top of bellhousing $25
1 set Bell housing mounting bolts $39
1 set DIS Module mounting bolts $20
Oil filter housing $150
1 set oil filter housing mounting bolts $20
1 set starter mounting bolts $20
2 Alternator brackets $25 ea.
Engine Wiring Harness Loom $20

03-29-2020	#1
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,852	LT5 Miscellaneous Parts LT5 Parts Great parts still available, feel free to make an offer. I am finalizing the parting out of a 1990 LT5 engine. Only these miscellaneous parts remain. The engine was in storage for the past few years that I am aware of. Not sure exactly how long. It reportedly had ~35k miles when removed. All the remaining parts I have available now are listed here. Im open to offers on everything especially multiple items. Prices listed do not include shipping. PM to make offers. Payment via PayPal only. The whole lot is available for a significant discount. H Injector Housing bolt set. $25 Throttle body bolt set $25 Fuel Pressure regulator vacuum line $15 MAP Sensor with plenum bracket $55 MDPS Sensor with the ECM bracket $55 Secondary throttle plate arms, washers, nuts set $79 Secondary linkages and mounting brackets with bolts $65 AC compressor, functional, no clutch $129 IAC Motor $25 Intake air temp sensor $25 [B]Both under plenum water temp sensors $35 Drive shaft with the yoke attached $149 Cam cover vent lines 1 driver side available $20 ea. 2 Flywheel bolt sets $39 ea 2 New Knock Modules (90 only) $99 ea. Power steering bracket with bolts $39 Water pump pulley with screws $39 Right and left engine mount brackets with bolts $70 Vacuum line keeper with bolts, mounts to PS reservoir $35 1 set ground bolts to top of bellhousing $25 1 set Bell housing mounting bolts $39 1 set DIS Module mounting bolts $20 Oil filter housing $150 1 set oil filter housing mounting bolts $20 1 set starter mounting bolts $20 2 Alternator brackets $25 ea. Engine Wiring Harness Loom $20 __________________ 90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. Last edited by Ccmano; 03-28-2022 at 05:56 PM.