Pilot bearing knocked out my engine plug - ZR-1 Net Registry Forums

Jagdpanzer · 03-17-2020

The rear crankshaft cup plug seals the lube oil bore in rear main journal. There is another pressed in cup plug located forward of it to seal the other end of the bore.
Image1584498084.240205.jpg
The dislodged cup plug should be fished out first before installing a new plug. Be sure to thoroughly clean the rear cup plug sealing area with suitable solvent and install using Loctite 620 and J38837 rear cup plug installation tool according to FSM instructions.

Sent from my iPhone using ZR-1 Net Registry

03-17-2020	#7
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,661	Re: Pilot bearing knocked out my engine plug The rear crankshaft cup plug seals the lube oil bore in rear main journal. There is another pressed in cup plug located forward of it to seal the other end of the bore. Image1584498084.240205.jpg The dislodged cup plug should be fished out first before installing a new plug. Be sure to thoroughly clean the rear cup plug sealing area with suitable solvent and install using Loctite 620 and J38837 rear cup plug installation tool according to FSM instructions. Sent from my iPhone using ZR-1 Net Registry __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake