Replaced battery, now will not run

[Dynomite]

Originally Posted by FormulaReed

About 2 weeks ago, I replaced the TPS, plugged in my scanner and set the TPS voltage. Car was running good. Went for a drive, turned her off and on and everything was fine.

The forecast was calling for some snow and I knew that I would not be driving the corvette for awhile so I took the battery out and plugged it into a float charger.....

Well, today the weather was great and I wanted to take the vette for a spin, nut when I put the battery back in it cranked fine, started up but than died. I tried a few more times and got the same thing. I can smell fuel, so I think it's getting fuel.

Any ideas? It wants to run, but it turns off like the ignition is being cut.

My car is a 1991.

Sent from my SM-T280 using ZR-1 Net Registry mobile app

If you smell gas then could be Fuel Pressure Regulator........especially if the LT5 starts after sitting for a while then floods out and quits.

Starts up then begins to run rough and dies