01-16-2020 | #1 |
Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
|
Few More Questions.....
1.Recently was reading about DAG... although I cannot see where it really is on the throttle body. Before reading about it, I sprayed the TB with Carb & Choke cleaner... did I mess up the DAG wherever it is?
2.When I put the injector housings back on, do I use loctite on the bolt threads? 3. Any type of silicone or anything along with the gaskets anywhere? Sorry if these are stupid questions... Thanks!
__________________
[B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B] |
|
|