Motor mounts?

[Ccmano]

Originally Posted by efnfast

C Beam is not obviously loose, but I did not put a socket to them.
Motor mounts? Floor jack and 2x4 under the oil pan?

You’ll need a torque wrench to check C Beam bolts properly. I think someone posted the specs. For the motor mounts jack the front of the car properly from the frame rails and put jack stands under the frame corners where the frame juts in behind the wheel wells. The frame K-members have to be removed including the bottom nut to the motor mounts. That will give you access to the mounts but you have remove the heat shield covers that go around the mounts to see them properly. It’s one of those deals where it’s such a hassle to check them you might as well just replace them while you in there if they're original.
H