Lower Seat Position - ZR-1 Net Registry Forums

Z51JEFF · 04-01-2018

Years ago I put a 4-speed in a 64 Nova I had and I made some seat extensions that allowed me to put the seat back a little further,what I made is basically what you would need. I took some 1/2 inch thick aluminum that was 2 inches wide and a few inches longer than the seat mounts. I had some counter sunk threaded allen bolts come up from the bottom of the bracket to the seat frame and then bolted the bracket to the floor. I’ve got a picture I can send in an email.

04-01-2018	#11
Z51JEFF Join Date: Dec 2007 Location: Fremont, CA Posts: 3,087	Re: Lower Seat Position Years ago I put a 4-speed in a 64 Nova I had and I made some seat extensions that allowed me to put the seat back a little further,what I made is basically what you would need. I took some 1/2 inch thick aluminum that was 2 inches wide and a few inches longer than the seat mounts. I had some counter sunk threaded allen bolts come up from the bottom of the bracket to the seat frame and then bolted the bracket to the floor. I’ve got a picture I can send in an email.