Fidanza users

[Ccmano]

Originally Posted by jss06c6

If the needle bearing was an issue, I'd expect you would see wear on the pilot shaft, but you've changed transmissions and no change, so nix that thought.. I'll get the clutch disc out to you today Hans.. something's off here (pun not intended!) and we sure need to isolate it..

Sent from my XT1585 using ZR-1 Net Registry mobile app

I appreciate your help Steve. If it was only the rattle at idle it would not bother me. But this grindy metallic shearing noise or Skill saw noise as some describe it at low rpm acceleration or load, particularly when hot, concerns me. Apparently some installers even consider it normal. At least I don’t appear to be alone. It will be a few weeks before I can pull it apart again.
H