Fidanza users - ZR-1 Net Registry Forums

9T1 Red ZR1 · 01-25-2018

I have a question for anyone using the Fidanza flywheel. I get a slight vibration/rattle from my transmission in only 5th or 6th gear when the RPMs are between about 1500 to 2000. Once above about 2000 rpm, it goes away and in any other gear in that RPM range, there is no vibration. I have C-beam plates and the torque is correct on them. Is this something anyone else has? Suggestions if it shouldn't be happening?

Thanks,
Bill

01-25-2018	#1
9T1 Red ZR1 Join Date: Jun 2013 Location: Warminster, PA Posts: 78	Fidanza users I have a question for anyone using the Fidanza flywheel. I get a slight vibration/rattle from my transmission in only 5th or 6th gear when the RPMs are between about 1500 to 2000. Once above about 2000 rpm, it goes away and in any other gear in that RPM range, there is no vibration. I have C-beam plates and the torque is correct on them. Is this something anyone else has? Suggestions if it shouldn't be happening? Thanks, Bill __________________ LT5 Red/Red