Fidanza and a Sprung Hub Disc - ZR-1 Net Registry Forums

Ccmano · 10-26-2017

Like many here, I shortly plan to install a Fidanza FW and a Sprung Hub Disc of an LT1 Camaro. I chose a McCleod Disc because of my positive history with them. I know that the raised hub side of the disc fits inside the cavity in the FW. I noticed that the flat side of the disc is marked “ Flywheel side”. Obviously it won’t fit that way. Can’t imagine the direction of rotation would affect this type of disc. Have any of you had to flip the disc over to install it? Attached are couple pix of the disc.
H

10-26-2017	#1
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,852	Fidanza and a Sprung Hub Disc Like many here, I shortly plan to install a Fidanza FW and a Sprung Hub Disc of an LT1 Camaro. I chose a McCleod Disc because of my positive history with them. I know that the raised hub side of the disc fits inside the cavity in the FW. I noticed that the flat side of the disc is marked “ Flywheel side”. Obviously it won’t fit that way. Can’t imagine the direction of rotation would affect this type of disc. Have any of you had to flip the disc over to install it? Attached are couple pix of the disc. H __________________ 90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold.