Underhood and suspension cleanup - ZR-1 Net Registry Forums

conesare2seconds · 09-18-2017

Hi everyone. 1994 124 was a Texas car and lived in a dusty environment. Once it was back up to spec mechanically it was time to give her a good bath.

There were two complications: First, the dust had some clay content and turned to a sticky paste when wet. Second, a "pro" detailer gave the inner fenders and wheel liners a coat of aerosol plasti-dip. The rubber coating encapsulated the dust and had to be removed with acetone, followed by cleaning the dirt itself.

Detailing tools were a spray bottle of distilled water, a spray bottle of Super Clean degreaser diluted 4:1, acetone, soft body and wheel brushes, a boar's-bristle brush, assorted small plastic and wire bristle brushes, microfiber cloths, and a Scotchbrite pad.

09-18-2017	#1
conesare2seconds Join Date: Jul 2016 Location: Greater St. Louis Posts: 488	Underhood and suspension cleanup Hi everyone. 1994 124 was a Texas car and lived in a dusty environment. Once it was back up to spec mechanically it was time to give her a good bath. There were two complications: First, the dust had some clay content and turned to a sticky paste when wet. Second, a "pro" detailer gave the inner fenders and wheel liners a coat of aerosol plasti-dip. The rubber coating encapsulated the dust and had to be removed with acetone, followed by cleaning the dirt itself. Detailing tools were a spray bottle of distilled water, a spray bottle of Super Clean degreaser diluted 4:1, acetone, soft body and wheel brushes, a boar's-bristle brush, assorted small plastic and wire bristle brushes, microfiber cloths, and a Scotchbrite pad.