Brakes Dragging on 1993 ZR-1

[WARP TEN]

Originally Posted by Marc Haibeck

Every time I have seen that problem it was caused by the master cylinder.

It's easy to determine for sure if the master is the problem. Have a brake line wrench in the car. Drive until the dragging is felt. Then loosen a brake line nut on the master cylinder. If the car rolls freely immediately after releasing the pressure, the master cylinder was the cause.

Marc's comments are always worth their weight in gold. He does not comment on problems too frequently, but when he does he is always worth listening to, as he had pretty much seen it all....Bob