Plenum Pull Poll... - ZR-1 Net Registry Forums

Roadster · 05-17-2017

For those who have done a plenum pull and can remember if the EVAP connector that connects the plastic lines to the solenoid and to the plenum and the canister line, did that connector have a plastic tie around the topside of the connector as shown?
Most likely it would be a black tie and not the different color as shown in the pic.
Although it has been mentioned that the MM did not use ties, the few used EVAP lines and connectors that I have seen and the NOS unit recently viewed do have the plastic tie on the connector.
Thanks for your participation.....

View Poll Results: EVAP connector....did it have a plastic tie on the topside?
Yes	2	40.00%
No	3	60.00%
Voters: 5. You may not vote on this poll

05-17-2017	#1
Roadster Join Date: Mar 2014 Location: Warrington PA Posts: 1,914	Plenum Pull Poll... For those who have done a plenum pull and can remember if the EVAP connector that connects the plastic lines to the solenoid and to the plenum and the canister line, did that connector have a plastic tie around the topside of the connector as shown? Most likely it would be a black tie and not the different color as shown in the pic. Although it has been mentioned that the MM did not use ties, the few used EVAP lines and connectors that I have seen and the NOS unit recently viewed do have the plastic tie on the connector. Thanks for your participation..... __________________ Tom 1994 ZR-1 #009 "captured test fleet car" 1974 LS4 454 Vert 1974 L-82 355 Vert. 1982 L83 CFI...now a retired "dd"....Sold WAZOO Member