No Crank Any Ideas? - ZR-1 Net Registry Forums

902066 · 04-22-2017

Pulled the plenum to change out original coils and rebuilt injectors. Put it all back together with new injectors from FIC. and n.o.s. coils, tried to start. Turn the key, everything on dash lights up like normal, fuel pumps run, but engine doesn't even crank.
Pulled plenum again, everything seems to be hooked up, no bent pins on connectors, and I thought they were all straight and tight.
I pulled the plenum the 1st time 10 years ago, put it all back together and it ran fine. Any ideas whats not right this time? Thanks jim

04-22-2017	#1
902066 Join Date: Jul 2005 Posts: 190	No Crank Any Ideas? Pulled the plenum to change out original coils and rebuilt injectors. Put it all back together with new injectors from FIC. and n.o.s. coils, tried to start. Turn the key, everything on dash lights up like normal, fuel pumps run, but engine doesn't even crank. Pulled plenum again, everything seems to be hooked up, no bent pins on connectors, and I thought they were all straight and tight. I pulled the plenum the 1st time 10 years ago, put it all back together and it ran fine. Any ideas whats not right this time? Thanks jim