Need distance from bell housing face to face of pilot bearing

[Dynomite]

Originally Posted by A26B

People I consider experts in this area, Mike Norcia/RAM Clutches, Bill Boudreau/ZR51 Performance, & Jim Jandik/Power Torque Systems recommend the bushing over the bearing, for one primary reason, the bushing will not damage the input shaft, a failed bearing will, due to the hardness of the roller bearings. I follow their recommendations.

One of my mentors Notes that a bronze bushing often comes loose and spins in the crankshaft..........I like the Needle Pilot Bearing and I make sure it is well lubed as well as the Throwout Bearing ID and Transmission Collar and pivots of the Clutch Fork.


Jerry's Gaskets has these in Stock
Transmission Pilot Bearing