PCV Valve Grommet - ZR-1 Net Registry Forums

TealZR1 · 01-13-2017

Appears to be a leak at my front PCV valve (very loose grommet) causing a high idle. I want to slip a small piece of vinyl tubing on the pcv nipples and than reinstall the grommet in hopes this will seal the grommet to the pcv. My question is what is the best way to remove the existing pvc valve. Any tricks to doing this? Very tight quarters. Thanks for your help in advance

01-13-2017	#1
TealZR1 Join Date: Oct 2016 Location: Atlanta GA Posts: 51	PCV Valve Grommet Appears to be a leak at my front PCV valve (very loose grommet) causing a high idle. I want to slip a small piece of vinyl tubing on the pcv nipples and than reinstall the grommet in hopes this will seal the grommet to the pcv. My question is what is the best way to remove the existing pvc valve. Any tricks to doing this? Very tight quarters. Thanks for your help in advance