Stainless brake hose for ZR-1

[DarkAngel]

Hello again everyone,

its been long time i didn't ask for help

i have an issue with stainless brake hose

i've decided to change my brake hose on my Z with some braided stainless one
because i've found that the pedal feel was too soft and i've changed also the pads with hawks

i've bought the one from ecklers (http://www.ecklerscorvette.com/corve...1988-1993.html) but unfortunately the front one cannot be mounted because the fixation part seem too thin for the front brakes
it seems that it was ok for the rear one
moreover the pedal feel is still the same even with new pads

does anyone know where i can found some stailess brake hose that can be mounted on the front brakes ?

and how i can improve the pedal feel
strangely it feels ok when i press one time the brake and that i press again but it's really not pratictal

Thanks for your help