ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-07-2016   #1
RussMcB
 
Join Date: Jan 2015
Location: Marietta, GA USA
Posts: 1,160
Default Possible Spark Plug Thread Problem

I know this has been discussed quite a bit. I've read past threads and gotten some good advice. I'm just checking to see if anyone might have some timely suggestions.

My #8 plug came out okay. I don't remember it having extra resistance, but when I went to screw it in (using a short piece of rubber hose), it seemed to stick very early, as if it was cross threaded. I backed it out, tried again with the same results. It was late at night so I decided to stop and think for a while.

I'll probably try brushes first (but not expecting that to do much), then maybe a thread chaser, hoping it might be a burr in the top of the threads.

My biggest worry is I might not be able to get a good, straight shot at the threads due to the A/C box obstruction (but I did read someone said it has provisions for moving out of the way).

I'm also leaning towards a long lasting spark plug (instead of the less expensive A/C Delcos), and maybe not worrying about changing it for many miles. Any good suggestions for a spark plug that might stay in place for a long time?

TIA.
RussMcB is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:54 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020