ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-26-2015   #1
MuRCieLaGo
 
Join Date: Aug 2014
Location: Trois-Rivieres (QC)
Posts: 473
Default Stalling issues - Code 31 (Camshaft Position Sensor)

1991 ZR-1

Hello guys,

I will explain my problem on this thread now.

I just bought the car yesterday and I drove the 800 kms back home.

Intermittent Service Engine Soon light.

When I come to stops or red lights, engine has a hard time going at idle.

50% of time: engine dies. I can start it back (I need to crank a bit longer but it starts).
Other 50% of time: idle goes to 500 rpm, go back a bit higher than 1,000 rpm, bounces for some seconds and then sets to normal idle (800?).

When it is cold, I don't have the problem at all (tested only this morning, can't tell if it is always like that).

Plus, I don't know if it has something to do with that problem, but when I go at WOT at around 75 mph (6th speed), the engine has a hard time going higher in RPM. WOT at 3,000 RPM at pretty much any speed is hard (it bucks, feels like misfires). WOT at 4,000 RPM and higher is nice and smooth.

Seller said:
-Plugs have been changed last year.
-Injectors have been changed last year.

No receipts at all. I know he's a honest guy though, no question there.

Anybody can help me? These LT5s are intimidating, I've a lot of stuff to learn there.

Thanks!
MuRCieLaGo is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:58 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020