F-Body wheel bearing installed - ZR-1 Net Registry Forums

Karl · 03-28-2015

I needed new front wheel bearing and after looking around the F-Body wheel bearings part no: SKF BR930186 is suppose to be one of the better options for a tough front wheel bearing that is better than factory.

Installation on both sides took me about 1 hour. Only difference is you insert the bolts from the rear and nuts in the front due to the threads on the bearings. Either that or tap them out.

Hope this helps with a option for the C4 ZR-1.

Edit, this bearing will work for 1991 - 1996 Corvette only.

Before:

After

Time to get that alignment, put some miles on the Z, and have some fun!

03-28-2015	#1
Karl Join Date: May 2013 Location: Chicago Posts: 979	F-Body wheel bearing installed I needed new front wheel bearing and after looking around the F-Body wheel bearings part no: SKF BR930186 is suppose to be one of the better options for a tough front wheel bearing that is better than factory. Installation on both sides took me about 1 hour. Only difference is you insert the bolts from the rear and nuts in the front due to the threads on the bearings. Either that or tap them out. Hope this helps with a option for the C4 ZR-1. Edit, this bearing will work for 1991 - 1996 Corvette only. Before: After Time to get that alignment, put some miles on the Z, and have some fun! __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold Last edited by Karl; 03-29-2015 at 03:08 AM.